Product ID:T-100, ALLOY RODS DUAL SHIELD LOW ALLOY (SUPDAT)
MSDS Date:02/27/1996
FSC:3439
NIIN:00N080909
MSDS Number: CFTRT

ESAB GROUP INC

801 WILSON AVE
HANOVER, PA 17331
US

Emergency Phone: 717-637-8911

Info Phone: 717-637-8911

Cage: HO829

ESAB GROUP INC

517 HANOVER, PA 17331 US

Telephone: 717-637-8911

Cage: HO829

MANGANESE; (MN) (SARA 313)

CAS: 7439-96-5

RTECS: OO9275000

Fraction By Weight: 3-4%

OSHA PEL 5 MG/M3 DUST, C

ACGIH TLV: 5 MG/M3 DUST

NICKEL; (NI) (SARA 313) (CERCLA)

CAS: 7440-02-0

RTECS: QR5950000

Fraction By Weight: 1-2%

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3

SODIUM TITANATE; (NA TITANATE) (MFR'S CAS #12034-34-2)

CAS: 12034-34-3

OSHA PEL N/K

ACGIH TLV: N/K

POTASSIUM TITANATE; (K TITANATE)

CAS: 12030-97-6

OSHA PEL N/K

ACGIH TLV: N/K

SILICON; (SI)

CAS: 7440-21-3

RTECS: VW0400000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

SILICA, CRYSTALLINE - QUARTZ; (SIO*2)

CAS: 14808-60-7

RTECS: VV7330000

OSHA PEL N/K

ACGIH TLV: 0.1 MG/M3 RDUST

TITANIUM OXIDE; (TIO*2)

CAS: 13463-67-7

RTECS: XR2275000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

SILICA, CRYSTALLINE - QUARTZ; (MINERAL SILICATES)

CAS: 14808-60-7

OSHA PEL N/K

ACGIH TLV: 0.1 MG/M3 RDUST

MOLYBDENUM; (MO)

CAS: 7439-98-7

RTECS: QA4680000

OSHA PEL N/K

ACGIH TLV: N/K

IRON; (FE)

CAS: 7439-89-6

RTECS: NO4565500

OSHA PEL N/K

ACGIH TLV: N/K

PROCESS, PROCS & CONSUMABLES USED.

RTECS: 9999999ZZ

OF OXIDES & FLUORIDES OF MATLS LISTED IN INGRED

RTECS: 9999999ZZ

& NITROGEN OXIDES. THE ONLY WAY TO DETERM THE TRUE

RTECS: 9999999ZZ

FOR MORE INFO ON HAZARDOUS DECOMP PRODUCTS CONTACT

RTECS: 9999999ZZ

LEAD TO THEIR ACCUM IN LUNGS, CNDTN WHICH

RTECS: 9999999ZZ

OF CHANGE IS PROPORTIONAL TO LENGTH OF EXPOS. CHGS

RTECS: 9999999ZZ

REDUCED LUNG FUNC/DISEASE. IN ADDN, CHGS ON X-RAYS

RTECS: 9999999ZZ

NICKEL & CHROMIUM (IN SOME PRODS) ARE CONSIDERED

RTECS: 9999999ZZ

PULM FIBROSIS & EDEMA. OVEREXP TO MANGANESE CMPDS

RTECS: 9999999ZZ

WEAKNESS, EMOTIONAL DISTURBS & SPASTIC GAIT.

RTECS: 9999999ZZ

IF NO DETECTABLE PULSE, BEGIN CPR. IMMED

RTECS: 9999999ZZ

& FULL LENGTH FSHLD W/FILTER LENS. START W/SHADE

RTECS: 9999999ZZ

LIGHTER SHADE WHICH GIVES SUFFICIENT VIEW OF WELD

RTECS: 9999999ZZ

IARC MONO, V 49, P 257,

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ELEC ARC WORK MAY CREATE ONE/MORE OF
FOLLOWING: FUMES & GASES CAN BE DANGEROUS TO HLTH. ELEC SHOCK CAN
KILL. ARC RAYS CAN INJURE EYES & BURN SKIN. NOISE CAN DMG HEARING.
ACUTE:GAS, FUME & DUST MAY IRR IT EYES, LUNGS, NOSE & THROAT. SOME
TOXGASES ASSOC W/WELDING MAY CAUSE PULM EDEMA, ASPHY & DEATH. MAY
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:SILICA, CRYSTALLINE-QUARTZ: IARC MONO, V
68, 1997:GRP 1. NTP 7TH ANNUAL RPT ON CARCINS, 1994:ANTIC TO BE
CARCIN.(ING 24)
Effects of Overexposure:HLTH HAZ: INCL WATERY EYES, NOSE & THROAT
IRRIT, HDCH, DIZZ, DFCLTY BRTHG, FREQUENT COUGH/CHEST PAIN.
PRESENCE OF CHROMIUM/CHROMATE IN FUME CAN CAUSE IRRIT OF NASAL
MEMBS & SKIN. NICKEL CMPDS IN FUME CAN CAUSE METALLIC TASTE, NAUS,
CHEST TIGHTNESS, FEVER & ALLERGIC RXN. CHRONIC:OVEREXP TO AIR
CONTAMINANTS MAY (ING 15)
Medical Cond Aggravated by Exposure:INDIVIDUALS W/ALLERGIES OR IMPAIRED
RESP FUNC MAY HAVE SYMPS WORSENED BY EXPOS TO WELDING FUMES.
HOWEVER, SUCH REACTION CANNOT BE PREDICTED DUE TO VARIATION IN
COMPOSITION & QTY OF DECOMP PRODS.

First Aid:INGEST: CALL MD IMMED. EYES: IMMED FLUSH W/POTABLE WATER FOR
AT LST 15 MIN, SEEK ASSISTANCE FROM MD . SKIN: FLUSH W/COPIOUS AMTS
OF WATER. CALL MD . IN CASE OF EMER, CALL FOR MED AID . EMPLOY
FIRST AID TECHNIQUE RECD BY RED CROSS. INHAL:IF BRTHG IS DFCLT,
GIVE OXYGEN & CALL MD. FOR ELEC SHOCK, DISCONNECT & TURN OFF POWER.
IF NOT BRTHG, BEGIN ARTF RESP, PREF MOUTH-TO-MOUTH.(ING 21)

Flash Point:NOT FLAMMABLE
Extinguishing Media:PROD WILL NOT BURN. HOWEVER, WELDING ARCS & SPKS
CAN IGNITE COMBUST & FLAM MATLS. USE EXTING MEDIA RECOMD FOR
(SUPDAT)
Fire Fighting Procedures:USE NIOSH APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:ONLY THE PACKAGING FOR THIS PRODUCT WILL
BURN.

Spill Release Procedures:NOT APPLICABLE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:READ & UNDERSTAND MFR'S INSTRUCTIONS &
PREC LABEL. SEE ANSI Z-49.1 & OSHA PUB 2206 (29CFR 1910), US GOVT
PRINTING OFFICE, WASHINGTON DC FOR MORE INFO.
Other Precautions:TRAIN THE WELDER NOT TO TOUCH LIVE ELECTRICAL PARTS
AND TO INSULATE HIMSELF/HERSELF FROM WORK & GROUND. TRAIN THE
WELDER TO KEEP HIS/HER HEAD OUT OF THE FUMES.

Respiratory Protection:USE NIOSH APPROVED RESPIRABLE FUME RESPIRATOR OR
AIR SUPPLIED RESPIRATOR WHEN WELDING IN CONFINED SPACE OR WHERE
LOCAL EXHAUST OR VENTILATION DOES NOT KEEP EXPOSURE BELOW TLV.
Ventilation:USE ENOUGH VENT, LOCAL EXHAUST AT ARC, OR BOTH TO KEEP
FUMES & GASES BELOW TLV IN WORKER'S BRTHG ZONE & GENERAL AREA.
Protective Gloves:WELDER'S GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS (ING 22)
Other Protective Equipment:ANSI APPRVD EYE WASH & DELUGE SHOWER . MAY
INCL ARM PROTECTOR, APRON, HAT, SHOULDER PROT & DARK SUBSTANTIAL
CLTHG.
Work Hygienic Practices:WEAR HEAD, HAND & BODY PROTECTION WHICH HELP TO
PVNT INJURY FROM RADIATION, SPARKS & ELECTRICAL SHOCK. SEE ANSI
Z-49.1.
Supplemental Safety and Health
MFR'S TRADE NAME/PART NO:T-1 FLUX CORED WELDING ELECTRODES. EXTING
MEDIA:BURNING MATLS & FIRE SITUATION. SEE ANSI Z49.1 "SFTY IN
WELDING & CUTTING" & "SAFE PRACTS" CODE:SP, PUB BY AWS, PO BOX
351040, MIAMI, FL 33135 & NFPA 518 "CUTTING & WELDING PROCESS" PUB
BY NFPA, BATTERYMARCH PARK, QUINCY, MA 02269 FOR ADDNL INFO.

Appearance and Odor:TUBULAR STEEL WIRE CONTAINING MINERALS AND ALLOYS;
ODORLESS.

Stability Indicator/Materials to Avoid:YES
NONE CURRENTLY KNOWN.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:WELDING FUMES & GASES CANNOT BE
CLASSIFIED SIMPLY. COMPOSITION & QTY OF BOTH DEPEND ON MATL BEING
WORKED, (ING 11)

Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSABLE CONTAINER OR
LINER IN AN ENVIRONMENTALLY ACCEPTABLE MANNER IN FULL COMPLIANCE
WITH FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.